Primary settler dwg
Primary settler; 1. establish the diameter of the settler that can vary; according to the rules; from 3.0 m to 60.0 m; according to the available space. 2. set the retention time; normally the sedimentation tanks are designed to provide a retention time of 1.5 to 2.5 hours. if you are going to design a tank at a temperature that does not go around 20 ° c; the graph in figure 5.2.1.12 can be used. 3. determine the surface load to be used. according to the standards and literature analyzed, this surface charge can vary in a range of 30 to 60 m3 / m2 / day. contains floor plans - sections and details of the sedimentator in autocad - dwg.